Universal joints

İmalat
2 yıl önce
/ Değiştirmek için önce il seçiniz / Değiştirmek için önce ilçe seçiniz

Tarih:

2023-01-15 03:19:38

İlan No:

#1055

Açıklama;

Product Description

Universal joints are the "joints" of the Universal Gearing of a vehicle drive system. Universal Gearing generally consists of universal joints and drive shafts, sometimes with intermediate supports.

Universal joints consist of universal yoke, joint cross, needle bearing, oil seal, sleeve, bearing cap etc. A universal joint assembly consists of a joint cross and four needle roller bearings, etc. The joint cross is one of the key components of a universal joint.

Product Introduction

The automotive joint cross is made of alloy steel (40Cr, 40CrNi, 20CrMo or 20CrMnVB) with a hardness of 58 to 62 HRC after heat treatment, and the maximum permissible crossing angle between two adjacent shafts is 15-20 degrees.

The needle rollers in the needle bearing can rotate during the rotation of the Universal joints in order to reduce friction. The shaft that is connected to the input power is called the input shaft and the shaft that outputs power via the universal joints is called the output shaft.

Product Advantages

1. Large angular compensation capacity.

2. Compact and reasonable structure. Integral fork head is used to make the load more reliable.

3. High load capacity. Compared with other types of couplings with the same swivel diameter, the torque transmitted is greater, so that the range is superior for machinery with restricted swivel diameters.