Semi-automatic Manual Down - Pressing Three-roll Plate Rolling Machine

Makine - Mekatronik sistemler
2 yıl önce
/ Değiştirmek için önce il seçiniz / Değiştirmek için önce ilçe seçiniz

Tarih:

2022-12-02 19:17:19

İlan No:

#953

Açıklama;

The structural type of the machine is three roll symmetrical type. The upper roll makes a vertical lifting movement at the symmetrical position in the center of the two lower rolls, which is obtained through the screw rod and worm drive. The two lower rolls make a rotary movement, and the output gear of the reducer is meshed with the lower roll gear to provide torque for rolling plates. The upper roller can be separated from the reclaiming, and the electric lifting roller can be lifted. It can be installed with backup wheel to roll cone, angle iron, channel steel and other different shaped steel.
The equipment is mainly composed of upper roller device, lower roller device, main transmission system, balance device, chassis, etc.

◆ upper roller device: the upper roller device includes upper roller, upper roller bearing seat, sliding bearing, etc. The upper roll is the main component of the plate bending machine. The upper roll is drum shaped and is used to compensate the stress, deformation and deflection of the upper roll. The upper roller is made of 45# steel

◆ lower roller device: the lower roller device includes two lower rollers, lower roller wallboard, sliding bearing, worm drive mechanism, etc. The lower roller device provides positive and negative torque for the rolled plate. The transmission torque is through the main transmission output gear and the lower roll input gear. The lower roll is made of 45# steel. The sliding bearing of the lower roll is made of SF-1 self-lubricating composite material.

◆ main drive system: the main drive system is composed of main motor, reducer, output gear, etc. The system can rotate forward and reverse, provide working power, transmit torque to the lower roll through the main reducer, output gear and lower roll gear, make the lower roll rotate, and drive the plate feed by friction to complete the rolling work.

◆ balance device: the balance device is composed of two pull rods and balance beam. After the side frame is overturned, the balancing device presses the tail of the upper roll to maintain the balance of the upper roll.

◆ chassis: welded by channel steel and steel plate, used to install various components

İlanı Şikayet Et

Paylaş: